Z-Series Cylindrical Lockset
On sale

Meets & Exceeds ANSI - A156.2, Series 4000, Grade 1 Standards
UL Listed for "A" Label 3 Hour Fire Doors
Meets ADA and ANSI A117.1 accessibility codes
Tested to over 2 Million Cycles
Steel, Zinc dichromated chassis for Corrosion Resistance
Clutching levers standard for Vandal resistance on locking functions
5" Solid zinc diecast levers, 3 1/2" wrought brass roses
Independent lever return springs to prevent lever sag
Non-Handed - Completely reversible
2 3/4" backset std. with 1 1/8" x 2 1/4" latchface, 2 3/8" backset is available with
1" x 2 1/4" latchface both with self adjusting front for square or beveled edge doors
Stainless Steel Latch bolt with 1/2" projection, Deadlocking on keyed functions
6 Pin Brass Cylinder, C Kwy, with 2 Keys (standard)
Optional: Prepared for Small format IC core (less core)
Optional: 11 popular competitor keyways available with replacement cylinders (extra charge applies)
Note: Replacement cylinders are supplied loose and not installed in locksets
Strikes: 4 7/8" x 1 1/4" ASA standard - T strike & Full lip strikes available when specified
Door Prep: ANSI A115.2 - 2 1/8" crossbore with (2) 5/16" Thru bolt holes

Factory Set for 1 3/4" thick doors - can be adjusted to fit 1 3/8" to 2" thick doors
Lever Styles: Flat (standard, shown above), Curved & Half Curved
Finishes: US26D in stock
Special Order Finishes: US3 PVD*, US4, US10B, US15, US26 PVD* (PVD = Lifetime Finish)
Fasteners: Combination screws for wood or metal doors & frames
Electrified Options: 12 or 24 Volt (AC/DC) Fail Safe (Electrically Locked), Fail Secure (Electrically Unlocked)
REX - Request to exit switch, See electrified section
Limited Lifetime Warranty